A facing is a piece of fabric that is sewn to the edge of a garment’s neckline, armhole, or other openings to finish the raw edge and give the garment a more polished look. Facings can be made from the same fabric as the garment or from a contrasting fabric. In sewing, facings are usually applied to bias tape, which is then sewn to the raw edge of the opening.
What is A Facing?
Facing is a technique used in sewing to finish the raw edges of a garment. It can be used on both curved and straight edges, and is often used on necklines, armholes, and hemlines. Facing can be made from the same fabric as the garment itself, or from a contrasting fabric for a decorative effect.
Types of Facing in Sewing
There are many types of facings used in sewing. The most common type of facing is bias tape, which is made from strips of fabric cut on the bias. This type of facing is typically used for necklines and armholes, as it can be easily molded to the shape of the garment.
Other types of facings include self-fabric facings, interlining facings, and lining fabrics.
Credit: blog.treasurie.com
What Does Facing Do in Sewing?
When you are sewing a garment, the process of “facing” is when you create a clean finished edge on the inside of the garment. This can be done by using bias tape, binding, or facings made from the same fabric as the garment. Facing is often used on necklines, armholes, and hemlines.
One reason you might choose to use facing rather than simply turning under the raw edge of your fabric and stitching it in place is that facing will give you a much cleaner finish. When you turn under and stitch a raw edge, that edge is likely to show through to the right side of your garment if it’s not sewn perfectly flat. By contrast, facing lies flat against your body and provides a smooth transition between the wrong side of your fabric and the lining (if your garment has one).
Another advantage of using facing is that it can add structure and support to certain areas of your garment. This is especially true if you’re using interfacing in conjunction with your facing. Interfacing is a type of fabric that’s used to stiffen other fabrics; it’s often used in collars and cuffs to make them stand up nicely.
Adding interfacing to a facing will help keep it in place and looking sharp.
If you’re interested in trying out some garments with facings, there are plenty of patterns available online and in sewing books. Start with something simple like a tank top or t-shirt; once you’ve mastered that, you can move on to more complicated garments like dresses and jackets.
What is Facing in Dressmaking?
There are a few different types of darts that can be used in dressmaking- the most common being the bust dart, waist dart, and hip dart. Each type of dart serves a specific purpose in terms of shaping the garment to fit the body.
The bust dart is used to create shape and definition at the bustline, while the waist dart nips in the fabric at the waistline to create a more fitted look.
The hip dart is less common but can be used to add shape to garments that sit lower on the hips, such as skirts or pants.
Darts are usually sewn by hand using a straight stitch, though they can also be done on a sewing machine. When sewing darts by hand, it’s important to take your time and sew slowly for best results.
Start by pinning the fabric together at either end of the dart (leaving about 1/4″ between pins), then use a running stitch to sew from one end of the dart to the other. Be sure to backstitch at both ends for extra strength.
After sewing your darts, press them flat with an iron – this will help them lay smoothly against your body when you wear the garment.
And that’s it! With just a few simple steps you’ve successfully added some essential shaping to your garment!
What is the Difference between Facing And Interfacing?
When it comes to sewing, there are a few key terms that you need to know. Two of these terms are “facing” and “interfacing”. But what exactly is the difference between the two?
To put it simply, facing is used to finish the raw edges of a garment, while interfacing is used to add structure and stability to a garment. Let’s start with facing. Facing is usually made from the same fabric as the garment itself, and is sewn onto the edge of the fabric in order to finish it off.
This gives the garment a clean look and helps prevent fraying. You can also use bias binding as a facing, which is when you fold strips of fabric into triangles and sew them onto the edge of the fabric. Interfacing, on the other hand, is usually made from a different material altogether.
It’s often made from fusible interfacing, which is a type of woven or non-woven fabric that has an adhesive on one side. This adhesive allows you to iron it onto your fabric, which makes it very easy to use.
What Do You Use for Facing?
There are a number of different products that can be used for facing. Some of the most popular options include:
-foundation
-concealer
-powder
-blush
-bronzer
Each of these products can help to create a smooth, flawless complexion. Foundation and concealer are used to cover up blemishes, while powder helps to set makeup and control shine.
Blush and bronzer can add a touch of color and definition to the face.
Conclusion
Facing technique is a great way to finish off a sewing project. It gives the project a clean, professional look and makes it easier to sew. With a little practice, anyone can master this technique. So get out there and start sewing!
